Products

DURATOOL 450 is a proven, high-performance bismaleimide (BMI) resin/carbon fiber tooling system that is capable of continuous service at 190°C (375°F) and short cycle service at 204°C (400°F).

BR® 6747-1 NC primer is a one-part, modified epoxy primer which contains no volatile organic compounds (VOCs). This non-chromated material is 100% water-based and does not rely on exempt solvents to achieve its zero VOC level rating.

METLBOND 1515-4M is an extended out life version of METLBOND 1515-3M modified epoxy film adhesive. It is a 350°F (177C) curing material, although curing at lower temperature is achievable.

BR® 127 corrosion inhibiting primer is a modified epoxy primer. It is the industry standard for high performance corrosion inhibiting primers and has been used in virtually every commercial aircraft built since its introduction. NSN: 8040-01-197-1696, 8040011971696

Kevlar® 120 is a plain weave aramid fabric. Kevlar® 120 holds its strength through temperatures ranging from -320°F to 800°F. This fabric is 43 percent lighter than fiberglass fabrics with double the strength.

Airpreg PECF 6550 is a high impact epoxy resin prepreg base on S2-glass fabric for aircraft radome application.

3M™ Scotch-Weld™ Structural Adhesive Primer EC-1660 (5%) (8040-01-202-5859, 8040012025859) is a primer for film adhesives in those applications where it is desired to obtain improved adhesion, or improved resistance to environmental exposure.

FM® 309-1 is a next generation film adhesive for bonding composite and metallic structures. This new film provides a unique combination of high Tg [360°F (182°C)], high toughness and higher temperature properties. FM® 309-1 is compatible with most 350°F (177°C) curing epoxy-based prepreg systems.

PrimeTex® Fabrics are more uniform as the filaments in each tow are spread out creating a thinner and more closely woven fabric that provides better mechanicals. It can be found in typical applications such as aircraft and helicopters, UAV/light aircrafts, automotive, and sports equipment.

Lightweight and easy to use, the 3M™ Performance Spray Gun was built for the industrial painter. Made from impact-resistant composite, it is one of the lightest spray guns in the industry, yet durable enough for demanding conditions.