Bagging Materials

Bagging materials are required when doing a composite lamination. It is important to use bagging materials as the bagging materials is what help compact the materials giving your part more strength and advantages.

HS8171 - Nylon Vacuum Bagging Film Solvay

Certified To: BMS 15-13
Bell MB 1312 J
Vac‐Pak HS8171 is a hydrophilic material. It is a clear green, heat stabilised, blown nylon 6 v-fold film. Vac‐Pak HS8171 has excellent tensile strength and heat ageing properties, having been succesfully used at pressures of 100PSI (6.9bar) and temperatures of up to 400°F (204°C).

WTJ20E00T15X0 - Thermocouple Wire Assembly CCS

WTJ20E00T15X0 is a thermocouple wire that is used as a sensor to measure temperature during the curing process whether in oven, autoclave, or out of autoclave.

WTJ20E00T10X0 - Thermocouple Wire Assembly CCS

WTJ20E00T10X0 is a thermocouple wire that is used as a sensor to measure temperature during the curing process whether in oven, autoclave, or out of autoclave.

MQ 46 - Nylon Vacuum Bagging Film 

MQ46 is a green tinted, heat stabilized film produced from nylon 6 resin. MQ46 is designed to be used as a high temperature vacuum bagging film for cure cycles up to 400°F.

TFR 38-P - Porus Release Fabric 

TFR 38-P is a woven fiberglass ("E" type) with a polytetrafluoroethylene coating. It is designed to release from all commercial resin systems with the transfer of the resin.

TFR 38-NP - Non-Porus Release Fabric 

TFR 38-NP is a woven fiberglass ("E" type) with a polytetrafluoroethylene coating. It is designed to release from all commercial resin systems with the transfer of the resin.

NPP-46 - Nylon Peel Ply 

NPP-46 is high temperature, nylon fabric which is heat-set and scoured for stability in cure cycles up to 350°F. It is ideal as a release material used directly against a laminate or adhesive bond surface where a textured surface is required for subsequent processing.

FEP 48-P - Perforated Parting Film 

FEP 48-P is a perforated parting film that is used in the vacuum bagging process that can be in direct contact with an uncured composite part without bonding.

FEP 48-NP - Non-Perforated Parting Film 

FEP 48-NP is a non-perforated parting film that is used in the vacuum bagging process that can be in direct contact with an uncured composite part without bonding.

B10OZ - Breather/Bleeder Cloth OXCO

Certified To: 10 OZ
OXCO Breather Bleeder Cloth 10 oz. is breather/bleeder cloth that is 100% non-woven polyester. It has a nominal weight of 10oz/sqft (+/- 10%) and a thickness of .19 inches (+/- 10%).
Having trouble finding what you need? Give us a call at 1-888-535-1810 or send us an email at sales@pccomposites.com and we'll be happy to help!