Solvay Products

Solvay Official Authorized Distributor – Pacific Coast Composites’ recent partnership with Solvay has allowed for PCC to distribute certified bagging materials to the aerospace industry. Solvay’s ability to provide innovative products and constantly evolving market solutions enables agile and tailored solutions for many application needs. Solvay is committed to developing the best technology that addresses sustainable mobility and improves resource efficiency.

SM9151 1/2″ - Bagging Materials,Vacuum Bagging Sealant Tape Solvay

Tacky Tape® SM9151 is a sealant tape developed for use in vacuum bagging. It will maintain an air-tight seal during the cure cycle, and then strip clean from the mold during de-bagging. Tacky Tape® SM9151 is Uuser friendly; easy to apply by hand, and ideal for oven or autoclave cure. Uses include: debulking/ compacting, envelope bagging, resin damming, or as a pressure strip, room temperature to 425°F (218°C) cure cycles, good adhesion to various films and tool surfaces, and non-hazardous.

SM5127 - Bagging Materials,Vacuum Bagging Sealant Tape Solvay

Tacky Tape® SM5127 is an unsurpassed performer where post cure cycles are required. It is compatible with most bagging films and is an ideal choice for use on composite tool surfaces. Tacky Tape® SM5127 is user friendly, easy to apply by hand, ideal for oven or autoclave cure, 250°F (121°C) temperature to 400°F (204°C) cure cycles, and strips clean from various tools surfaces.

SM5127 1/2″ - Vacuum Bagging Sealant Tape Solvay

Tacky Tape® SM5127 is an unsurpassed performer where post cure cycles are required. It is compatible with most bagging films and is an ideal choice for use on composite tool surfaces. Tacky Tape® SM5127 is user friendly, easy to apply by hand, ideal for oven or autoclave cure, 250°F (121°C) temperature to 400°F (204°C) cure cycles, and strips clean from various tools surfaces.

60001-NAT - Nylon Peel Ply Solvay

Nylon Peel Ply 60001 features a scoured and heat set finish for use directly against laminates or bond lines. It is approved on a range of OEM specifications for composite manufacturing and metal bonding. Nylon Peel Ply 60001 can be used at temperatures up to 400°F and has a fabric weight of 2.5oz/yd2.

SV 3000 - Nylon Vacuum Bagging Film Solvay

Stretch‐Vac 3000 is hydrophilic material. Moisture and water act as plasticisers. The level of moisture content at time of use is therefore an important factor for successful performance. The higher the moisture content the more flexible they become. Conversely at lower moisture levels flexibility is limited.

SV 2000 - Nylon Vacuum Bagging Film Solvay

Stretch‐Vac 2000 is hydrophilic material. Moisture and water act as plasticisers. The level of moisture content at time of use is therefore an important factor for successful performance. The higher the moisture content the more flexible they become. Conversely at lower moisture levels flexibility is limited.

HS 8171QD - Nylon Vacuum Bagging Film Solvay

Quickdraw HS8171 is a hydrophilic material. Moisture and water act as plasticisers. The level of moisture content at time of use is therefore an important factor for successful performance. All nylon films absorb water. The higher the moisture content the more flexible they become. Conversely at lower moisture levels flexibility is limited. Do not store rolls vertically on their ends.

HS 6262 - Nylon Vacuum Bagging Film Solvay

Vac-Pak HS6262 is a hydrophilic material. Moisture and water act as plasticizers. The level of moisture content at time of use is therefore an important factor for successful performance. All nylon films absorb water. The higher the moisture content the more flexible they become. Conversely at lower moisture levels flexibility is limited.

HS8171-SHT 60″ - Nylon Vacuum Bagging Film Solvay

Vac‐Pak HS8171 is a hydrophilic material. It is a clear green, heat stabilised, blown nylon 6 film. Vac‐Pak HS8171 has excellent tensile strength and heat ageing properties, having been succesfully used at pressures of 100PSI (6.9bar) and temperatures of up to 400°F (204°C).

A5000 P - Perforated Parting Film Solvay

Release Film A5000 P (9330-01-196-5436, 9330011965436) features a high temperature fluoropolymer and exhibits excellent elongation and release properties suitable for use with all prepreg systems.
Having trouble finding what you need? Give us a call at 1-888-535-1810 or send us an email at sales@pccomposites.com and we'll be happy to help!