3D Composites
3M
American Fiber & Finishing
Cabot
CCS
Cerex
Cytec
Dexmet Corporation
Fibertec
H.B. Fuller
Henkel
Hexcel
Hill Industries
Huntsman
Insul-Fab
ITW Polymers
JPS Composite Materials
Sensitech
Solvay
The Grieve Corporation
Adhesive Coatings
Contact Adhesives
Core Splice Adhesives
Film Adhesives
Foaming Adhesives
Structural Adhesives
Polyurethane Protective Boots
Aluminum Foil
Aluminum Mesh
Pre-Primed Aluminum
Bagging Film
Breather/Bleeder Cloth
Nylon Peel Ply
Parting Film
Release Fabric
Wire Systems
Fiberglass
Graphite
Kevlar
Positioning Fabrics
Metallic
Non-Metallic
Fiberglass
Graphite
Kevlar
Corrosion Inhibiting Primer
2 Part Resin Systems
2 Part Sealants
Compound Filler
Release Agents
Surface Pre-Treatment
Flame Retardant Tapes
Flash Tape
Foam Tape
Foil Tapes
Sealant Tape
Vinyl Tapes2 Part Resin Systems
The Resins we stock and distribute are typically thermosetting, electrical-grade insulating resins. Categorized as either epoxies or polyurethanes, the different product lines includes two-part epoxy liquids and two-part polyurethane liquids. Their unique electrical and physical properties make them ideal for insulating and protecting electrical/electronic parts and assemblies. Generally when choosing a resin system you will need to determine if it will be processed in an oven or will it be cured at room temperature. Resin systems are available in a variety of formulations to meet many specific applications and service requirements.
EPOCAST 1636 - 2 Part Resin System Huntsman
Certified To: BMS 5-28 TY6
Epocast® 1636-A/B epoxy syntactic is a high-performance, two-part system with high strength and good high temperature resistance.
EC-3587 B/A B-1/4 - 2 Part Resin System 3M
3M™ Scotch-Weld™ Structural Adhesive EC-3587 B/A Gray (62-3316-5910-7, 62331659107; 8030-01-653-1794, 8030016531794) is a two-part polyurethane that cures at room temperature or with heat to a tough, impact-resistant material.
EC-3587 B1/4 - 2 Part Resin System 3M
3M™ Scotch-Weld™ Structural Adhesive EC-3587 B/A Gray is a two-part polyurethane that cures at room temperature or with heat to a tough, impact-resistant material.
EC-3524A/B - 2 Part Resin System 3M
Certified To: BMS 5-28 TY 9
3M™ Scotch-Weld™ Void Filling and Edge Sealing Compound EC-3524 B/A is a two-part flame retardant epoxy. It can be used for void filling, edge sealing, and as an abradable compound in aircraft engines.
EA956 - 2 Part Resin System Henkel
Certified To: GE171A4702
LOCTITE EA 956 AERO is a two-component adhesive, which has excellent elevated temperature strength. Its room temperature cure capability and low viscosity make it ideal for repair applications, including laminating, injection and coating.
EA960F - 2 Part Resin System Henkel
LOCTITE EA 960F AERO (fast) is a fairing and smoothing compound for exterior aircraft surfaces. It is a two component system, which cures rapidly at room temperature. LOCTITE EA960F AERO is color coded to identify when fully mixed.
EA9394 - 2 Part Resin System Henkel
Certified To: BMS 5-109 TYII CL2 GR A
BMS 8-338 GR 120 FORM I
BMS 8-338 GR 120 FORM I
LOCTITE EA 9394 AERO (8040-01-288-5856, 8040012885856) is a two-part structural paste adhesive, which cures at room temperature and possesses excellent strength to 350°F/177°C and higher.
EA9395 - 2 Part Resin System Henkel
Certified To: DAS-AS9294
LOCTITE EA 9395 AERO is a two-component adhesive system, which cures at ambient temperature and has excellent strength properties @ 350°F/177°C and higher.
EA9396 - 2 Part Resin System Henkel
Certified To: BMS 8-301 CL3
LOCTITE EA 9396 AERO (8040-00-209-1286, 8040002091286) is a low viscosity, room temperature curing adhesive system with excellent strength properties at temperatures from -67°F to 350°F.
EA9396 C-2 - 2 Part Resin System Henkel
LOCTITE EA 9396/C-2 AERO is an elevated curing, low viscosity structural adhesive. LOCTITE EA 9396/C-2 AERO uses a non-aromatic amine curing agent that retains many of the excellent properties offered by aromatic amine curing systems.
Having trouble finding what you need? Give us a call at 1-888-535-1810 or send us an email at sales@pccomposites.com and we'll be happy to help!