Products

Quickdraw HS8171 is a hydrophilic material. Moisture and water act as plasticisers. The level of moisture content at time of use is therefore an important factor for successful performance. All nylon films absorb water. The higher the moisture content the more flexible they become. Conversely at lower moisture levels flexibility is limited. Do not store rolls vertically on their ends.

Tacky Tape® SM9151 is a sealant tape developed for use in vacuum bagging. It will maintain an air-tight seal during the cure cycle, and then strip clean from the mold during de-bagging. Tacky Tape® SM9151 is Uuser friendly; easy to apply by hand, and ideal for oven or autoclave cure. Uses include: debulking/ compacting, envelope bagging, resin damming, or as a pressure strip, room temperature to 425°F (218°C) cure cycles, good adhesion to various films and tool surfaces, and non-hazardous.

Tacky Tape® SM5127 is an unsurpassed performer where post cure cycles are required. It is compatible with most bagging films and is an ideal choice for use on composite tool surfaces. Tacky Tape® SM5127 is user friendly, easy to apply by hand, ideal for oven or autoclave cure, 250°F (121°C) temperature to 400°F (204°C) cure cycles, and strips clean from various tools surfaces.

Tacky Tape® SM5127 is an unsurpassed performer where post cure cycles are required. It is compatible with most bagging films and is an ideal choice for use on composite tool surfaces. Tacky Tape® SM5127 is user friendly, easy to apply by hand, ideal for oven or autoclave cure, 250°F (121°C) temperature to 400°F (204°C) cure cycles, and strips clean from various tools surfaces.

Polyester Peel Ply 60001 features a scoured and heat set finish for use directly against laminates or bond lines. It is approved on a range of OEM specifications for composite manufacturing and metal bonding. Polyester Peel Ply 60001 can be used at temperatures up to 400°F and has a fabric weight of 2.5oz/yd2.

Stretch‐Vac 3000 is hydrophilic material. Moisture and water act as plasticisers. The level of moisture content at time of use is therefore an important factor for successful performance. The higher the moisture content the more flexible they become. Conversely at lower moisture levels flexibility is limited.

Stretch‐Vac 2000 is hydrophilic material. Moisture and water act as plasticisers. The level of moisture content at time of use is therefore an important factor for successful performance. The higher the moisture content the more flexible they become. Conversely at lower moisture levels flexibility is limited.

Quickdraw HS8171 is a hydrophilic material. Moisture and water act as plasticisers. The level of moisture content at time of use is therefore an important factor for successful performance. All nylon films absorb water. The higher the moisture content the more flexible they become. Conversely at lower moisture levels flexibility is limited. Do not store rolls vertically on their ends.

Vac-Pak HS6262 is a hydrophilic material. Moisture and water act as plasticizers. The level of moisture content at time of use is therefore an important factor for successful performance. All nylon films absorb water. The higher the moisture content the more flexible they become. Conversely at lower moisture levels flexibility is limited.

3M™ Vinyl Tape 471 is a versatile tape that provides long-lasting floor and safety marking, sharp paint lines on complex jobs and reliable seals or repairs in a variety of industries. Designed with unique stretch properties, this tape conforms to rough, irregular, curved and convex surfaces while remaining stretched and without lifting after application. The rubber adhesive offers quick stick and excellent holding strength on many substrates.