Adhesives

3M™ Scotch-Weld™ Urethane Adhesive EC-3532 B/A is a two-component, polyurethane adhesive which cures at room temperature or with heat to form tough, impact-resistant structural bonds.

FM® 377 film adhesive is a 350°F (177°C) cure modified epoxy designed for continuous services at 350°F (177°C). FM® 377 exhibits excellent structural performance from -67°F to 350°F (-55°C to 177°C).

METLBOND 1515-4M is an extended out life version of METLBOND 1515-3M modified epoxy film adhesive. It is a 350°F (177C) curing material, although curing at lower temperature is achievable.

FM® 309-1 is a next generation film adhesive for bonding composite and metallic structures. This new film provides a unique combination of high Tg [360°F (182°C)], high toughness and higher temperature properties. FM® 309-1 is compatible with most 350°F (177°C) curing epoxy-based prepreg systems.

LOCTITE EA 7000 AERO (Known as Hysol PL7000) (8040-01-457-6446, 8040014576446) is an epoxy film adhesive for composite bonding applications. It provides excellent performance properties in composite bonding and has excellent results on composite surfaces.

FM 377 film adhesive (8040-01-525-6152;8040015256152) is a 350°F cure modified epoxy designed for continuous services at 350°F. FM 377 film adhesive provides outstanding durability in bonding metallic and non-metallic substrates, and in the co-cure or secondary bonding of composites structures.

LOCTITE EA 9658 AERO (EA 9658 .100 NWG) is a new technology, nacelle film adhesive. It combines high temperature strength controlled flow to minimize hole blockage and flash/flow clean up in the shop.

LOCTITE EA 7000 AERO (Known as Hysol PL 7000) is an epoxy film adhesive for composite bonding applications. It provides excellent performance properties in composite bonding and has excellent results on composite surfaces.

LOCTITE EA 460 AERO (Known as Hysol PL 460) is a foaming epoxy adhesive in paste form that used for splicing honeycomb core edge closeouts and core filling.

3M™ Fuel Resistant Coating EC-776SR (8030-00-664-4954, 8030006644954) is a general purpose, solvent based adhesive/coating with good adhesion to synthetic rubber, metal, glass, and many plastics. 3M EC-776SR Coating includes a red dye for identification purposes.