Product Search

Carbon Fiber, Style 282 PrimeTex ZB is a dry graphite fabric that has a PrimeTex finish. This fabric has light weight properties, extreme high strength, while maintaining a fatigue and fire resistant stature.

HexForce Carbon Fiber, Style 282 is a 3K plain weave, never twisted dry graphite fabric. This fabric has light weight properties, extreme high strength, while maintaining a fatigue and fire resistant stature.

AGP280-5H is a 5-Harness dry graphite fabric. This fabric has light weight properties, extreme high strength, while maintaining a fatigue and fire resistant stature.

BMS 9-8 3K-70-P is a plain weave dry graphite fabric. This fabric has light weight properties, extreme high strength, while maintaining a fatigue and fire resistant stature.

BMS 9-8 3K-135-8H is a 8-harness satin weave dry graphite fabric. This fabric has light weight properties, extreme high strength, while maintaining a fatigue and fire resistant stature.

BMS 8-212 3K-70-PW TY4 CL 2 is graphite pre-preg plain weave that contains HexPly® F263 resin system. It's an advanced modified epoxy formulation designed for autoclave curing to offer very high laminate strengths.

BMS 8-168 3K-70-PW TY2&3 (8305-01-517-6419, 8305015176419) is a graphite pre-preg plain weave that contains HexPly® F155 resin system. It's an advanced modified epoxy formulation designed for autoclave curing to offer very high laminate strengths.

AH370-5H-39" (9390-01-574-7914, 9390015747914) is a 5-harness satin weave dry graphite fabric. This fabric has light weight properties, extreme high strength, while maintaining a fatigue and fire resistant stature.

Quickdraw HS8171 is a hydrophilic material. Moisture and water act as plasticisers. The level of moisture content at time of use is therefore an important factor for successful performance. All nylon films absorb water. The higher the moisture content the more flexible they become. Conversely at lower moisture levels flexibility is limited. Do not store rolls vertically on their ends.

Tacky Tape® SM9151 is a sealant tape developed for use in vacuum bagging. It will maintain an air-tight seal during the cure cycle, and then strip clean from the mold during de-bagging. Tacky Tape® SM9151 is Uuser friendly; easy to apply by hand, and ideal for oven or autoclave cure. Uses include: debulking/ compacting, envelope bagging, resin damming, or as a pressure strip, room temperature to 425°F (218°C) cure cycles, good adhesion to various films and tool surfaces, and non-hazardous.