Product Search

Airpreg PECF 6550 is a high impact epoxy resin prepreg base on S2-glass fabric for aircraft radome application.

3M™ Scotch-Weld™ Structural Adhesive Primer EC-1660 (5%) (8040-01-202-5859, 8040012025859) is a primer for film adhesives in those applications where it is desired to obtain improved adhesion, or improved resistance to environmental exposure.

FM® 309-1 is a next generation film adhesive for bonding composite and metallic structures. This new film provides a unique combination of high Tg [360°F (182°C)], high toughness and higher temperature properties. FM® 309-1 is compatible with most 350°F (177°C) curing epoxy-based prepreg systems.

PrimeTex® Fabrics are more uniform as the filaments in each tow are spread out creating a thinner and more closely woven fabric that provides better mechanicals. It can be found in typical applications such as aircraft and helicopters, UAV/light aircrafts, automotive, and sports equipment.

Quickdraw HS8171 is a hydrophilic material. Moisture and water act as plasticisers. The level of moisture content at time of use is therefore an important factor for successful performance. All nylon films absorb water. The higher the moisture content the more flexible they become. Conversely at lower moisture levels flexibility is limited. Do not store rolls vertically on their ends.

Tacky Tape® SM9151 is a sealant tape developed for use in vacuum bagging. It will maintain an air-tight seal during the cure cycle, and then strip clean from the mold during de-bagging. Tacky Tape® SM9151 is Uuser friendly; easy to apply by hand, and ideal for oven or autoclave cure. Uses include: debulking/ compacting, envelope bagging, resin damming, or as a pressure strip, room temperature to 425°F (218°C) cure cycles, good adhesion to various films and tool surfaces, and non-hazardous.

Tacky Tape® SM5127 is an unsurpassed performer where post cure cycles are required. It is compatible with most bagging films and is an ideal choice for use on composite tool surfaces. Tacky Tape® SM5127 is user friendly, easy to apply by hand, ideal for oven or autoclave cure, 250°F (121°C) temperature to 400°F (204°C) cure cycles, and strips clean from various tools surfaces.

Tacky Tape® SM5127 is an unsurpassed performer where post cure cycles are required. It is compatible with most bagging films and is an ideal choice for use on composite tool surfaces. Tacky Tape® SM5127 is user friendly, easy to apply by hand, ideal for oven or autoclave cure, 250°F (121°C) temperature to 400°F (204°C) cure cycles, and strips clean from various tools surfaces.

Polyester Peel Ply 60001 features a scoured and heat set finish for use directly against laminates or bond lines. It is approved on a range of OEM specifications for composite manufacturing and metal bonding. Polyester Peel Ply 60001 can be used at temperatures up to 400°F and has a fabric weight of 2.5oz/yd2.

Stretch‐Vac 3000 is hydrophilic material. Moisture and water act as plasticisers. The level of moisture content at time of use is therefore an important factor for successful performance. The higher the moisture content the more flexible they become. Conversely at lower moisture levels flexibility is limited.